LANsense Non-Invasive Power Monitor

The LANsense CL-Amp is a non-invasive power monitoring device designed for use with the LANsense Rack Mangaer II or LANsense Row Controller.

The CL-Amp is a true retrofit device requiring no disruption to the power supply being monitored and can simply be clipped on to the supply cable of a PDU or single device. 

CL-Amp is perfect for retrofit monitoring of existing PDU or as a temporary solution where "on the spot" measurement is required for investigation or troubleshooting.

A fork in the body of the CL-Ap allows it to be placed directly over a power cable and a choice of locking ring collars to suit most international 13A, 16A and 32A cable sizes are provided.

Each locking ring separates into two halves and is placed around the power cable and pushed into the CL-Amp clamping bore, retaining the cable with a neat twist and lock action.

A very lightweight device, it is designed to be installed at any convenient location on the cable.

• Current measuring range 1.0 Ampere to 60 Amperes.

• Measured supply range: 90VAC ~ 250VAC. Frequency: 50Hz ~ 60Hz A.C.

• Size: 134mm x 88.5mm x 41mm, Weight: 135gm

• RS232 / RS485 Communication link to LANsense monitoring units. Providing SNMP data collection, monitoring, and configuration of CL-Amp.

• RJ45 connector for direct connection 

• 12V DC power supply @60mA

• Cable collars supplied to support: 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm & 18mm diameter cables.

• Local LED display provides two digit readout .

• Can be calibrated to cable types to provide typically ±3% accuracy Ampere current readings