MV and HV accessories

Power Accessories

  • All types of connectors and plugs for bare and insulated cables.
  • We produce insulated connectors for distribution and transmission equipment (transformers, switches), as well as cable joints and terminations.


To maintain and repair existing networks, a new, reliable transition joint was launched at RWE in Germany, as well as a temporary quick repair joint for EDF in France.


Related products and solutions


Resin & Compounds
Systems, Accessories & Equipment/Power accessories/Installation material & tools/Components

Epoxy resins
The epoxy resins are offering high electrical and mechanical properties. They are used as primary insulation and as mechanical protection for medium and low voltage joints. They have good adhesion properties on cable outer sheaths and metals, like copper, aluminium and lead. The two component resin is supplied in mixer pack.
 

Polyurethane resins
The polyurethane resins have excellent electrical and mechanical properties. They are used as primary insulation in low voltage joints and as mechanical protection for medium and low voltage joints. They have good adhesion properties on cable outer sheaths and metals, like copper, aluminium and lead. The low temperature developed during the chemical reaction allows the use of great quantities. The two component polyurethane resin is supplied in mixer pack or, for great quantities, in plastic buckets. .
 

Polybutadiene resins

   
MV Branch joints
Systems, Accessories & Equipment/Power accessories/MV accessories/MV Joints

Nexans branch joints will allow you to interconnect 2 cables on 1, that is to say a junction point.

At the moment, we can only provide this product for single core synthetic insulated cables, in cold shrinkable and bolted connector version.

For other kind of branch joints, please feel free to contact us.

   
Clamps
Systems, Accessories & Equipment/Power accessories/Ferrules and lugs

Dead-end clamps for stranded copper conductors for Al, ACSR and AAAC conductors for Al, ACSR and AAAC conductors with stainless steel bolts and nuts Universal overhead line clamps for copper conductors for Al and ACSR conductors

Dead-end clamps for stranded steel wires acc. to DIN 48 201 Parallel groove clamps for tap-off connection for stranded Al and copper conductors without thrust plate, for copper conductors with thrust plate for copper conductors 2-bolt type, for Al and ACSR conductors 2-bolt type, for Al and ACSR conductors, with stainless steel bolts and nuts 3-bolt type, for Al and ACSR conductors 3-bolt type, for Al and ACSR conductors, with stainless steel bolts and nuts

Split bolt connectors for copper conductors ISO-Tap-off clamps for main and tap-off conductors

   
Interface C
Systems, Accessories & Equipment/Power accessories/MV accessories/MV Connectors, Surge Arrestors

Whether straight, elbow, or T-shaped, these connectors are designed to connect your cables to switchgears or transformers equipped with C interface according to Cenelec standard.

Also available : bushing to be installed into switchgears, and surge arrester to protect your electrical devices.

   
Interface A
Systems, Accessories & Equipment/Power accessories/MV accessories/MV Bushings
 
   
MV Outdoor Terminations
Systems, Accessories & Equipment/Power accessories/MV accessories/MV Terminations

The Nexans sealing ends are built for the modern cables networks.
They conduct the electrical field and prevent humidity from getting in the conductors and in the insulating layers of the cable.

   
MV Indoor Terminations
Systems, Accessories & Equipment/Power accessories/MV accessories/MV Terminations

The indoor terminations are designed to be installed in MV / LV transformers and switchgears, up to 24 kV.

They are available in cold shrink or heat shrink technologies.

   
Tools for Cables preparation
Systems, Accessories & Equipment/Power accessories/Installation material & tools

In addition of cables and accessories, Nexans also provides some tools for preparation and assembly.
 

Cable preparation tools can be provided individually or in dedicated kits. Accessories assembling tools are provided individually.

   
Other Ferrules and Lugs
Systems, Accessories & Equipment/Power accessories/Ferrules and lugs

V-Type Terminal Clamp Al Flat-Type Terminal Clamp Al Compression cable lugs, copper acc. to DIN 46235 for stranded copper conductors acc. to DIN 48201 and copper cables acc. To VDE 0295, uncoated or tin-plated

Compression cable lugs, copper angle type for stranded copper conductors acc. to DIN 48201 and copper cables acc. to VDE 0295, uncoated or tin-plated

Compression cable lugs, copper, with 2 palm holes for stranded copper conductors acc. to DIN 48201 and copper cables acc. to VDE 0295 uncoated or tin-plated

Compression cable lugs, copper, longitudinally sealed for stranded copper conductors acc. to DIN 48201 and copper cables acc. to VDE 0295 uncoated or tin-plated Compression cable lugs, copper, standard type without or with inspection hole tin-plated, for stranded copper conductors, acc. to DIN 48201 and copper cables acc. to VDE 0295

Cable lugs, copper, 2 screws-clamping type with 2 bronce screws for stranded copper conductors acc. to DIN 48...

   
Heat-shrink components
Systems, Accessories & Equipment/Power accessories/Installation material & tools/Components
 
   
MV Straight joints
Systems, Accessories & Equipment/Power accessories/MV accessories/MV Joints

Nexans straight joints will allow you to connect two MV cables togheter, wether they are single core or three cores, paper insulated (PILC) or synthetic insulated (XLPE), made of copper or aluminium. Each combination of these paramaters can be answered by one of our product, as long as cables are built in the same way. To connect cables made of different technologies together, please refer to "transition joint" section.
 

In addition, you have the choice of core connection : deep indent crimping, hexagonal restraint, or bolted connectors, and the choice of the best adapted technology : cold or heat shrinkable. Make your choice within the parametric search, and please feel free to contact us !

   
Interface B
Systems, Accessories & Equipment/Power accessories/MV accessories/MV Connectors, Surge Arrestors

Whether straight, elbow, or T-shaped, these connectors are designed to connect your cables to switchgears or transformers equipped with B interface according to Cenelec standard.
 

Also available : bushing to be installed into switchgears, and surge arrester to protect your electrical devices

   
Interface C
Systems, Accessories & Equipment/Power accessories/MV accessories/MV Bushings
 
   
Interface A
Systems, Accessories & Equipment/Power accessories/MV accessories/MV Connectors, Surge Arrestors

Whether straight, elbow, or T-shaped, these connectors are designed to connect your cables to switchgears or transformers equipped with A interface according to Cenelec standard. 
 

Also available : bushing to be installed into switchgears, and surge arrester to protect your electrical devices

 

   
MV Transition joints
Systems, Accessories & Equipment/Power accessories/MV accessories/MV Joints

Nexans transition joints will allow you to connect two MV cables made of different technologies togheter, wether they are single core or three cores, paper insulated (PILC) or synthetic insulated (XLPE), made of copper or aluminium. Each combination of these paramaters can be answered by one of our product.
 

In addition, you have the choice of core connection : deep indent crimping, hexagonal restraint, or bolted connectors, and the choice of the best adapted technology : cold or heat shrinkable.