• infos
    • Last modified 06-Mar-2017
Send link to this page

Medium Voltage Jumpers for Wind Application

Contact

01908 250850
Print a datasheet / Create a PDF file

Description

Standards

National :  Customer specification

Description

 

  • Pre-installed MV Windlink cable Jumper MV Nacelle connection for windturbine applications
     
  • Pre-installed windlink cable jumper sets. Installed with Euromold accessories, connector and /or termination up to 42kV.
     
  • Voltage and partial discharge test in accordance with IEC 60502 – 2 individual documented.

Docs and info

  • Pre-assempled MV transformer and switchgear connection with Euromold-Products

      

  • 1.Nacelle connection

    With connector and termination up to 42kV

     

     

    With connector up to 42kV

     

     

    With connector 24kV

     

  • 2.Accessories

    Terminations AFN up to 41,5 kV

     

    Application
    - A termination for use outdoors and exposed to prolonged sunshine and other weather conditions
    - Provides a simple and quick method of stress relieving on screened polymeric cables

     

    Design
    1. An Al or Cu cable lug
    2. A watersealing silicone sleeve
    3. A silicone housing with sheds and integrated
    conductive silicone rubber insert providing stress relief for the cable
    4. Watersealing mastic
    5. An earthing clamp
    6. An earthing lug

     

    Specifications and standards
    Meets the requirements of CENELEC HD 628 S1 & HD 629.1 S1 and IEC 60502-4

     

    Technical characteristics
    The slip-on termination has an electrical performance at least equal to the cable

     

     

     

    Interface C Connector Series 400TB

    Touch proofed tee connectors P440 TB

    Special selected for the customized application
    - indoor/outdoor application
    - voltage rate up to 41,5 kV
    - cable cross section

     

     

    Interface C
    Dimensions according to European
    CENELEC EN 50180 and 50181 (in mm)

     

     

    Design
    Separable connector comprising
    1. Conductive EPDM insert
    2. Conductive EPDM jacket
    3. Insulating EPDM layer moulded between the insert and the jacket
    4. Type C- 630 A interface as described by CENELEC EN 50180 and 50181.
    5. Conductor connector
    6. Basic insulating plug (with VD joint
    7. Cable reducer
    8. Conductive rubber cop.
    9. Clamping screw.
    10. Earthing lead

    The screen break design enables cable outer sheath testing without removing or dismantling the connector

     

    Specifications and standards
    The separable connector 440TB meets te requirements of CENELEC HD 629.1

     

     

Close

You must be registered to access this service.
Sign in with your Nexans account :