Mechanical Field Connectors

The Mechanical Field Connectors are used to simplify the installation and maintenance cabling where connectors are necessary.

• Space saving
  The splice integrated in the connector plug avoids the need of a splice holder and a coiling area with radius management around the splice.
• Simplicity
  Childlike implementation, no splicing machine, no energy source.
• Reliability
  Easy test of the good installation with a laser light, half of the splice is prepared in factory (stripping, cleaning, and cleaving processes done in a safe and clean environment).

Applicable cables:

Flat cable: 2x1.6mm; 3x2mm with E-SC universal type

Round cable: 250µm; 900µm (tight buffer) with Q-SC type

                       2mm; 2.8mm with E-SC universal type

                       4.5 to 5mm with E-SC drop

Type of singlemode connectors available (formultimode please contact us):

• LC: LC/PC or LC/APC
• SC: SC/PC or SC/APC

Implementation Process, in 5 steps:

1. Prepare the cable and set the connector on the guide called "jig"
2. Set the holder on cable end
3. Remove fibre coating and cleave fibre
4. Insert fibre into the connector
5. Take out wedge plate, guide jigs and check connection quality with the “light window”