LANmark-OF UGPE (Unitube - Outdoor)
StandardsInternational : ISO/IEC 11801
Description and Application
The cable consists of a loose tube structure with watertight glass yarns and a PEHD jacket.
The cable is watertight due to the gel in the loose tube and the watertight yarns. The glass yarns also provide rodent protection.
The reinforced cable can be installed outdoor in a duct by pulling or by blowing. The PEHD jacket has excellent friction properties for this installation type.
The UG-type has one unitube with 12 or 24 fibres (250µm).
Termination of these fibres is done with splicing of pigtails.
Legend accompanying the cross section drawing:
- 1. Loose Tube
- 2. 250 µm fibres
- 3. Jelly
- 4. Reinforcing watertight glass yarns
- 5. Rip cord
- 6. FRP reinforcement
- 7. PE Outer sheath
- Outdoor cable for installation in a duct by pulling or blowing
- Designed for termination by splicing
- Unitube cable with strength element
- Full dielectric design
- Waterproof structure
- Rodent retardant
- Wide temperature range