Description
Exclusively compatible with NEOCLICK® connectors.
Standards
International : IEC 60228; IEC 60502-1National : NF C 32-013
Description
NEOBUS has been designed especially for the power connection of Electric Vehicles Supply Equipments. (EVSE)
Thanks to its HFFR properties (halogen free, flame retardant), conforming to CPR (Construction Prodcts Regulation), it can be installed in indoor car parks.
NEOBUS allows pre-wiring and powering any charging station for electric vehicles from 3 to 22 kW AC. It has been tested and validated for the connection of communicating charging stations with Power Line Communication (PLC, G3 or HomePlug) reducing the cabling effort accordingly.
Installation
NEOBUS® can be laid on cable trays or fixed to the walls. The connection of the charging stations is carried out simultaneously or later thanks to the IP2X NEOCLICK® insulation piercing connectors.
NEOBUS can respond to all installation situations:
- Pose facilitated by the twisted design
- Separate earth cable (NEOBUS 1Gx50mm²)
- Suitable for all ground regimes (TT / TN-C-S / TNS)
- Circular aluminum shrunken, wired
- Double insulation: Crosslinked polyethylene.
- Outer sheath: HFFR type DM01
- Conductor: U1000 AR2V 50 or 95 mm² section
Identification des conducteurs :
- Neutral : NEOBUS 0.6 /1 KV 4 x 1 x section mm2 211 OF / Fabrication year
- Phase 1 : -------------1--------- NEOBUS ----------1------------
- Phase 2 : -------------2--------- NEOBUS ----------2------------
- Phase 3 : -------------3--------- NEOBUS ----------3------------
Characteristics
| Construction characteristics | |
|---|---|
| Conductor material | Aluminum |
| Conductor flexibility | Stranded class 2 |
| Outer sheath | Halogen free flame retardant |
| Lead free | Yes |
| Colour | Aqua |
| Dimensional characteristics | |
| Conductor cross-section | 50mm² |
| Number of cores | 1 |
| Cable Diameter | 13mm |
| Approximate weight | 251kg/km |
| Electrical characteristics | |
| Rated Voltage Uo/U (Um) | 0.6/1 kV |
| Usage characteristics | |
| Flame retardant | C2, NF C 32-070 |
| Smoke density | Standard |
| Operating temperature, range | -25 .. 60°C |
| Laying operation bending radius | 130mm |
Docs and info
Charging slots & NEOBUS® power supply according to cross sections
|
|
|||||
|
NEOBUS® |
Max current per phase (A) |
Max number of charging points when full power is supplied |
|||
|
3,7 kVW |
7 kVW |
11 kVW |
22 kVW |
||
|
16 A mono |
32 A mono |
16 A three |
32 A three |
||
|
NEOBUS 0,6/1kV 4x1x50 GL |
154 |
28 |
12 |
8 |
4 |
|
NEOBUS 0,6/1kV 4x1x95 GL |
241 |
42 |
21 |
15 |
7 |
NEOBUS DRUM PACKAGING
|
|
||||||||||||
|
Drum |
C 1050mm |
D 1200 mm |
E 1400mm |
F 1650mm |
G 1900mm |
H 2200mm |
||||||
|
L Max |
Weight |
L Max |
Weight |
L Max |
Weight |
L Max |
Weight |
L Max |
Weight |
L Max |
Weight |
|
|
NEOBUS 0,6/1kV 4x1x50 GL |
180 |
241 |
325 |
370 |
380 |
545 |
604 |
802 |
1000 |
1325 |
N/A |
N/A |
|
NEOBUS 0,6/1kV 4x1x95 GL |
110 |
242 |
180 |
375 |
270 |
470 |
352 |
780 |
697 |
1455 |
1000 |
2098 |
|
NEOBUS 0,6/1kV 1G50 |
1015 |
291 |
1800 |
485 |
2270 |
648 |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
|
*N/A : not available |
||||||||||||
-
Connexion example
For normal 3.7 to 7 KVA charging stations, the power supply to the terminal is single-phase. The NEOBUS® Kit consists of three insulation piercing connectors to be installed on each twisted cable start, respectively 1 PH, 1 N and 1 PE of 50 mm²
For the terminals of 7 to 22 kVA the power supply of the terminals is in three-phase, the kit consists of 5 connectors: 3 PH, 1N and 1 PE of 50mm²
If the length of the shunt between a connector and the charging station is greater than 3 meters, the standard imposes an additional protective case comprising:- 30mA protection
- 20A or 40A thermal circuit breaker (depending on the power delivered)
