Kit NEOCLICK® Three phase
Power Connector for Electric Vehicle Charging Stations.
Optimal solution, specially designed for charging infrastructures for electric vehicles and exclusively compatible with NEOBUS®
StandardsNational : NF C 15-100; XP C 32-321
The NEOCLICK connector allows the supply of equipment by branches from NEOBUS® cables and cable assemblies. The NEOCLICK connector is designed to facilitate the installation of charging terminals for electric vehicles from 3kW to 43kW.
The NEOCLICK connector is universal and suitable for connecting all conductors.
For slow charging stations (3.7kW) to normal (7kW), power is supplied in one phase by connecting the selected phase, the neutral conductor and the earth conductor.
For accelerated or fast higher power terminals (22kW or 43kW), the connection will be made in three-phase, requiring 2 additional connectors for the added phases.
NEOCLICK is also available individually, depending on your needs.
Main conductor: NEOBUS main cable, U1000 AR2V with cross section: 50 mm²-150 mm² / NF C 32-321,
Branch cable: U1000 Ro2V cables, section 16 mm² to 35 mm² double insulation / NF C 32-321
NEOCLICK connectors are easily installed on the energy bus:
1 / Separate the phases of the twist
2 / Position the connector on the chosen phase
3 / Place the branch cable
4 / Tighten the connector until the fuse head breaks.
|Conductor section of the main cable, range||50 .. 150mm²|
|Conductor section of the branched cable, range||16 .. 35mm²|
|Maximum operating voltage||1kV|
|Permissible current rating in open air||63A|
|Ambient installation temperature, range||-5 .. 40°C|